Members
Previous Member Search for Maine Built Boats

Sabre Yachts
Sabre Yachts
For more information contact:
Lynn Beaudoin
12 Hawthorne Road
Raymond, ME 04077
Phone: 207-655-3831
Fax: 207-655-5050

Email this member directly
Visit member's website

About Sabre Yachts

Sabre Yachts has been crafting sail and motor yachts for 35 years and has built 3,000 hulls to date. Sabre currently builds and six powerboat models from 38 to 54 feet in length. In 2015 Sabre will launch its largest model to date the exciting new Sabre 66. Sabre motor yachts are sold worldwide, through a network of competent, professional dealers who are chosen for their reputation, location, and visibility within a local market and for the quality of their sales and after sales service. Sabre's manufacturing facilities are located in Raymond, Maine, approximately 25 miles north of Portland, and a little over two hours from Boston.

In 1994, Sabre acquired North End Marine of Rockland, Maine, at the time, a major builder of marine molds and production fiberglass parts. The company's name was changed to North End Composites in 1996 and today this shop is used for the production of fiberglass hulls and decks for Sabre's larger powerboat models.

The Sabre story began in 1970, when the company's founder, Roger Hewson, set out to build the finest possible 28-foot sailing yacht using production line methods and fiberglass technology. In a small, 4,000 square foot building, with a handful of employees and a vast amount of market research which he had done on the marine industry, he designed and built the first Sabre 28, and introduced it to the market at the 1971 Newport Boat Show in Newport, RI. The boat was a success, and over the next fifteen years, 588 Sabre 28's were built.

Many sailboat models followed in the 44 years since the launch of the first Sabre 28 and a complete listing is available in the FAQ section of this web site. In 1989 Sabre sought to broaden its market and created the first Sabreline 36 "Fast Trawler", a tri-cabin motoryacht with the spaciousness and comfort of the trawler design but with substantially better performance than traditional trawler hulls. Today Sabre's production is dedicated to power boats and all models are built on planing, deep-vee hulls. The current range includes the Sabre 38, 42, 48 and 54 Salon Expressí and the Sabre 42 and 54 Fly Bridge.

Through the years Sabre has listened carefully to its owners and dealers, and has constantly refined each product with a Model Year Improvement Program. Client surveys, participation in owners associations, and annual owner's reunions have allowed Sabre to remain abreast of the market and in touch with existing and prospective customer's needs.

A COMMITMENT TO EXCELLENCE

The Sabre work force consists of men and women who take tremendous pride in their work and are sensitive to the marine tradition of the State - hence the company's motto, "Crafted in the Maine Tradition". Most Associates are capable of working in all of the different phases of boat building, and have a full understanding of the influence that their jobs have on the quality of the final product. Nearly one third of Sabre's Associates have been with the Company for over a decade, and many have celebrated their second decade with the company.

Quarterly meetings and regular team luncheons are used to update Associates on market conditions and the company's competitive position. Safety concerns, along with production and quality issues, are discussed at these meetings, as is the Sabre Gain Share Program which allows Associates to be rewarded for meeting production and quality objectives. Warranty claims are used as an offset to the Gain Share pool. Significant tenure anniversaries are also celebrated at these meetings.

Sabre stresses excellence at all stages of the boat building operation. Low employment turnover, an emphasis on safe procedures and cross training, and a thorough awareness of each model's competitive position in the marketplace, have enabled Sabre to meet high standards of excellence in manufacturing and design, and to adapt to changing business conditions.

Our search for excellence does not end at our doors. Our suppliers are also chosen for their reputation, reliability and the excellence of the products they manufacture.

The production of every Sabre yacht is monitored by an extensive and thorough Quality Assurance program. Each boat has a "Boat Parent" who is an office staff Associate and who follows the boat through the production process, acting as the "eyes" of the consumer. All purchased parts and sub-assemblies are checked as they enter production and each boat is given a 600-point inspection during six separate stages of the building process. As the yacht nears completion, a 12 page report is prepared by Sabre's Head Inspector, along with a full technical inspection of all mechanical and electrical systems. And as a final check, a Gold Inspection is performed by the Boat Parent. This inspection is unstructured and is meant to judge the overall quality, feel and appearance of the boat.

Once the yacht arrives at the dealership, a detailed Commissioning check list is completed by the dealer, and a detailed report sent back to Sabre Yachts. This check point ensures us that all systems were functioning to Sabre's satisfaction and standard when the yacht was delivered into service.

As clients and dealers report issues back to Sabre's After Sales Service staff, no matter how large or small the issue may be, a Customer Quality Report (CQR) is developed and circulated to all members of Management and Engineering, as well as to all Production Associates effected by the report.

For more information about our company or our yachts, please contact us.
Boat
Board of Directors
Maine Built Boats invites all Maine boat builders, boat building schools and industry partners to join the effort to market Maine's old world craftsmanship, innovation and cutting-edge technologies to the boating community in Maine, nationally and internationally!

JOIN US TODAY!

Our New Members
Buxton Boats
Stonington, ME
Journey's End
Rockland, ME
John's Bay Boat Shop
South Bristol, ME
Farrins Boat Shop
Walpole, ME
AJ Enterprises
Winter Harbor, ME
Lash Brothers Boat Yard
Friendship, ME
Fogg's Boatworks
North Yarmouth, ME
Edgerly Woodworking
Surry, ME
This workforce solution was funded by a grant awarded under Workforce Innovation in Regional Economic Development (WIRED) as implemented by the U.S. Department of Labor's Employment and Training Administration. The solution was created by the grantee and does not necessarily reflect the official position of the U.S. Department of Labor. The Department of Labor makes no guarantees, warranties, or assurances of any kind, express or implied, with respect to such information, including any information on linked sites and including, but not limited to, accuracy of the information or its completeness, timeliness, usefulness, adequacy, continued availability, or ownership. This solution is copyrighted by the institution that created it. Internal use by an organization and/or personal use by an individual for non-commercial purposes is permissible. All other uses require the prior authorization of the copyright owner.